POWER-DCAC2PNDC-X.  Low Current Dual Output VX & -VY Voltage DC power supply board/Regulator Interface board.

 

The POWER-DCAC2PNDC-X. is an electronics board that allows you to connect Low voltage 12VDC (10 to 20VDC) or 12VAC (9 to 20VAC) on one side of the board and get dual low current regulated voltages, VX VDC and -VY VDC  on the other side. Every industrial application designer should have a few of these boards handy. The boards will allow you to easily power all your Industrial Op-Amp transducers. The Terminal Block TB connector is included and makes it easy to use. 

 

The POWER-DCAC2PNDC-X. board is designed to convert low current low voltages AC or DC to stabilize +/- V DC. If used properly, it will eliminate the need for expensive industrial power supplies, which would otherwise be needed to carry out the same task. Commonly utilized as the heart of low current DC Power Supply for Amplified and In-Line Amplified Transducer.

 

DCAC2PNDC-X is easy to install, setup and operate. If you want to  professionally power your HVAC products, POWER-DCAC2PNDC-X offers the features you need. Mounted easily via tow 0.125" mounting holes.

 

The board is designed to attenuate, filter and regulate low current low voltage AC or DC to stable +/-V DC.

 

For our line of transformers click Here

 

 

                  

 

Standard Board Model XA                         Standard "Pigi Board" Model XB

 


 

 

 

Single 12V AC or DC convert to low current X VDC and -Y VDC with common ground

 


 

 

Model XA

 

Figure A Model XA

 

1. Input 12VDC or 12VAC (~/+, ~/-) Voltage from PLC.

2. Output +/- V DC (-V, COM, +V), i.e +9VDC and -9VDC.

3. LED Power Indicator.

 

Model XB

 

 

Figure B Model XB

1. Input 12VDC or 12VAC (~/+) Voltage from PLC.

2. Input 12VDC or 12VAC ( ~/-) Voltage from PLC.

3. Output - V DC, i.e. -7.5VDC or -5VDC or -8VDC or -9VDC or -10V...

4. Output COM

5. Output + V DC, i.e. 7.5VDC or 5VDC or 8VDC or 9VDC or 10V...

3. LED Power Indicator.

 


Mounting Option

 

Simply snap the Din-Rail mounted enclosure into your NEMA 4 box (enclosure) for watertight applications

 

 

The board Model XA shown above mounted in EID-1593KBK black ABS plastic instrument enclosure with Din-Rail mounting options

 

Plastic enclosure and Din-Rail-clip are sold separately (for demonstration only).

 

 

"Pigi Board" Model BX, wires are options.

 

Note: Please be advised that plastic enclosure, mounting screws, are options and sold separately.

 


 

POWER-DCAC2PNDC-X Features

 

  • Up to 70mA output max.

  • +/-5% voltage stability.

  • Power switch option.

  • Generally powered from any power source, Dual AC or DC, that is larger then 2 volts of the desired +/-VDC output voltage.

Specifications

  • Input voltage                           9-20V AC or DC model depended!

  • Relative Output voltage stability  +/-5%

  • Output current                         Up to 70mA, higher output current models are available.

  • PCB material                             FR4

  • Output Voltage                         +/- VDC (3 to 10VDC)

  • Max power consumption             .5W

  • Storage temperature                 40 - 70   [F]

  • Operating temperature               32 - 140 [F] (0 to 60°C) @ 95% RH

  • Low board DC voltage                30[V] max

  • Manufactured                           100% in USA

Pricing 

 

* Prices, P#, SKU# and colors are subject to change without notice. 

  

Description and SKU#

Price

Picture

12V DC/AC to 5VDC and -5VDC PS Low current Input 12VDC or 12VAC, outputs +5V /40mA & -5V /20mA. Model XA with 5 Terminal Blocks.

 

P# EID-POWER-PSD-DCAC2PNDC5XA12

 

 

 

 

47.52

 

 

 

12V DC/AC to 7.5VDC and -7.5VDC PS Low current Input 12VDC or 12VAC, outputs +7.5V /50mA & -7.5V /20mA. Model XA with 5 Terminal Blocks.

 

P# EID-POWER-PSD-DCAC2PNDC7X5XA12

 

 

 

 

45.33

 

 

 

12V DC/AC to 9VDC and -9VDC PS Low current Input 12VDC or 12VAC, outputs +9V /50mA & -9V /20mA. Model XA with 5 Terminal Blocks.

 

P# EID-POWER-PSD-DCAC2PNDC9XA12

 

 

 

 

45.33

 

 

 

12V DC/AC to 10VDC and -10VDC PS Low current Input 12VDC or 12VAC, outputs +10V /50mA & -10V /25mA. Model XA with 5 Terminal Blocks.

 

P# EID-POWER-PSD-DCAC2PNDC10XA12

 

 

 

 

54.33

 

 

 

12V DC/AC to 5VDC and -5VDC PS Low current Input 12VDC or 12VAC, outputs +5V /40mA & -5V /20mA. Model XB

 

P# EID-POWER-PSD-DCAC2PNDC5XB12

 

 

 

 

52.47

 

 

12V DC/AC to7.5VDC and -7.5VDC PS Low current Input 12VDC or 12VAC, outputs +7.5V /50mA & -7.5V /25mA. Model XB

 

P# EID-POWER-PSD-DCAC2PNDC7X5XB12

 

 

 

 

57.33

 

 

12V DC/AC to 9VDC and -9VDC PS Low current Input 12VDC or 12VAC, outputs +9V /50mA & -9V /25mA. Model XB

 

P# EID-POWER-PSD-DCAC2PNDC9XB12

 

 

 

 

57.33

 

 

12V DC/AC to 10VDC and -10VDC PS Low current Input 12VDC or 12VAC, outputs +10V /40mA & -10V /25mA. Model XB

 

P# EID-POWER-PSD-DCAC2PNDC10XB12

 

 

 

 

57.33

 

 

  •